Product Details
- Size1/2 in
- MaterialStainless Steel
- Fuel TypeNatural Gas
- Voltage24 v
Description
24 Vac Dual Standing Pilot Gas Valve with 1/2 in. x 1/2 in. inlet\outlet, slow opening and 3.5 in. wc pressure regulator setting. Includes: Natural to LP Conversion Kit, One 1/2" x 3/8" reducer bushing, One 3/4" straight flange.
- Combination gas controls for use in 24 Vac, gas-fired, standing pilot appliances with capacities from 20 to 200 cfh
- Controls include manual valve, two automatic operators, servo pressure regulator and pilot adjustment
- Compact size
- Provide two automatic valves
- Solenoid-operated first automatic valve opens on thermostat call for heat; closes when call for heat ends
- Diaphragm-operated second automatic valve opens under control of regulator; closes if gas or power supply is interrupted
- Meet codes requiring dual safety shutoff
- Natural to LP and LP to Natural conversion kits available for standard and slow opening gas valves
- LITE-RITE (OFF-PILOT-ON) lighting sequence
- All adjustments, wiring connections and pilot outlet are accessible from top of control
- Adjustable servo regulator effectively maintains almost constant gas output pressure under wide fluctuations in gas supply pressure
- Compatible with ECO connector
- Type: Single Stage
- Ignition Type: Standing Pilot
- Type of Gas: Natural
- Inlet/Outlet Size (in.): 1/2 in. x 1/2 in.
- Body Pattern: Straight-through
- Opening Characteristics (standard, step): Slow Opening
- Capacity @ 1 in. p.d.: 130,000 BTU/hr; 20,000 BTU/hr minimum
- Pressure Ratings: ½ psi, or 3.5 kPa
- Pressure Regulator Setting: 3.5 in. wc (psi), or 0.87 kPa
- Pilot Gas Outlet: Compression fitting for 1/4 in. OD tubing
- Pressure Tapping: 1/8 in. NPT with plug
- Electrical Connections: Combination screw and 1/4 in. male quick connects
- Anticipator Setting: 0.5 A
- Mounting: 0 to 90 degrees in any direction from the upright position of the gas control knob, including vertically
- Dimensions (in.): 5 3/8 in. high x 4 1/16 in. wide x 2 11/16 in. deep
- Dimensions (mm): 135 mm high x 104 mm wide x 69 mm deep
- Approvals, American Gas Association IAS: AGA Design Certified: File no. L2025006; CGA Design Certified: File no. L2025006; UL Component Recognized: File no. MH5323
- Approvals, Canadian Gas Association: UL Component Recognized: MH5323
Note:
This product must be installed by a qualified/licensed contractor and
set up with properly calibrated combustion test equipment. Failure to
comply with this could result in substantial property damage, severe
personal injury or death.