Product Details
- Voltage115 v
- Horse Power1/3 hp
- MaterialCast Iron, Plastic Base
- Amperage9.7 A
- Hertz60 Hz
- Max Flow 43 GPM
- ColorGreen
- RPM1550 RPM
- Dimensions9.96 x 7.95 x 10.16 in
- Weight21 lbs
Description
Submersible pump for dewatering (sump) or effluent (septic tank systems).
- Float operated, submersible (NEMA 6) 2 pole mechanical switch & variable level long cycle systems available
- Corrosion resistant powder coated epoxy finish
- No sheet metal parts to rust or corrode
- Stainless steel screws, switch arm, guard and handle
- No screens to clog
- Watertight neoprene square ring between motor and pump housing
- Solid buoyant polypropylene float
- Oil-filled, hermetically sealed, automatic reset thermal overload protected motor
- Upper and lower sleeve bearings running in bath of oil
- Entire unit pressure tested after assembly
- Carbon and ceramic shaft seal
- Maximum temperature for effluent or dewatering 130°F (54°C)
- Passes 1/2" spherical solids
- 1-1/2" NPT discharge
- On point: 7-1/4", Off point: 3"
- Watertight and dust tight
- Permanently oiled bearings
- Impeller Type: Non-clogging vortex impeller
- Reserve Powered Design. For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump.
- Cast iron switch case, motor and pump housing
- Engineered thermoplastic base
- Engineered, glass filled, plastic impeller with metal insert
- Stainless steel guard and handle
- Lower and upper bearings, oil fed cast iron
Customer Reviews
-
Zoeller 53-0001 Sump Pump (115v, 9.7A, 1/Zoeller 53-0001 Sump Pump (Green, 115v, 9.7A, 1/3hp,
I have always used Zoeller pumps. This one just replaced my 10 year old previous one. It never failed, I just thought it was time to replace. I bought the identical pump because they perform flawlessly. Do yourself a favor and pass on cheaper pumps. This one won't let you down.