Beckett 7556A0000U Burner Control (12VDC)

The Beckett GeniSys® 7556 Oil Burner Control is a potted (for high moisture environments) 12 VDC primary safety control for oil burners used on pressure washers, road stripers, crack sealers, hot patchers, and asphalt distributors, to name a few examples. The GeniSys® 7556 is used with a suitable cad cell flame sensor to control the oil burner motor, igniter, and optional solenoid valve. It can provide interrupted or intermittent duty ignition, and it has a 15 second lockout time.

• Programmable valve-on delay and motor-off delay provides chamber cooling after call for heat.
• Valve-on delay / motor-off delay — field-programmable with Beckett GeniSys® Contractor Tool.
• Epoxy potted for moisture resistance.
• Welded relay protection with redundant motor relays.
• High ambient temperature rating.
• Alarm output enables visual or audio indication of flame failure and lock out condition.
• Interrupted ignition.
• Relight function.
• Fused protection.
• 15 second lockout time.
• Communication port.

• Voltage: 12 VDC nominal (11 to 16 VDC).
• Current: 160 mA nominal (500 mA max at 16 VDC).
• Enable Load: 40mA at 12 VDC.

Outputs

• Motor: 12 VDC, 20 full load amps (FLA), 100 locked rotor amps (LRA).
• Igniter: 12 VDC, 5 A.
• Solenoid Valve: 12 VDC, 2 A.
• Lockout Alarm: 12 VDC, 2 A.

Programed Delays (Changeable with Beckett Contractor Tool)

• Valve On Delay: 0 seconds.
• Motor Off Delay: 0 seconds.