Product Details
- Voltage120 v
Description
Used with: VC Series Valve. Control central heating and/or cooling systems, fan coil systems,
radiators and convectors. Depending on the model selected, it can be
controlled by either a low or line voltage SPST or SPDT controller such
as a room thermostat.
- Use with two-way or three-way valves.
- Minimal actuator power consumption.
- Quick-connect or one meter cable electrical connections available.
- Quick and easy replacement of moving parts.
- Actuator head installation does not require draining the system.
- On/Off models with six second nominal timing.
- Use two-position actuators with 1000 Series 2 way and 6000 Series 3-way VC valve bodies only.
- All VC Series actuator-valve combinations provide 60 psi close-off.
- 2 wire + com for SPST controller 120V.
- Close-Off: 60 psi.
- Actuator Type: Valve.
- Application Type: HVAC.
- Fail Safe Mode: Stays in Place.
- Control Signal: 2 position.
- Control Signal: SPST.
- Supply Voltage: 100 to 130V.
- Number of Internal Aux. Switches: 0.
- Medium Temp: 203F.
- Shaft Adapter Type: Self Alignment.
- Manual Operation: Lever.
- Stroke: .4 inches.
- Maximum Differential Pressure Ratings (Close-off) (psi): 60 psi.
- Mounting: Direct Coupled.
- Frequency: 50, 60 Hz.
- Timing, Nominal Driving @ 60 Hz (sec): 6 seconds.
- Dimensions: 2.8 in. high x 3.7 in. wide x 2.7 in. deep.
- Electrical Protection: Double Insulated.
- Power Consumption (Driving) : 6 VA.
- Electrical Connection: 39 inches.
- Electrical Connection: Cable.
- Cable Entry: Molded Strain Relief.
- Temperature Range, Ambient (F): 32F to 150F.
- Temperature Range, Storage (F): -40 to 150F.
- Operating Humidity Range (% RH): 5 to 95% RH, non-condensing.