Product Details
- Temperature Range100 to 200 °F
Description
Note: This product does not come with a well.
Immersion type controllers for hydronic heating systems that turn off the burner whenever the boiler water temperature rises to the setpoint. Vertical mounting.
Features
Product Specifications
Immersion type controllers for hydronic heating systems that turn off the burner whenever the boiler water temperature rises to the setpoint. Vertical mounting.
Features
- High Limit Aquastat Controller has adjustable set point.
- Models available for use with immersion wells or for direct immersion if faster response is needed.
- A factory-set stop is available on L4080 to prevent setting the control at too high a temperature.
- Models available with second limit switch to shut off all gas to the burner.
- Liquid fill in sensing element expands as the boiler temperature rises.
- At the set point temperature, a diaphragm-actuated snap switch breaks the power supply to the burner primary control.
Product Specifications
- Application: Immersion type controllers for hydronic heating systems that turn off the burner whenever the boiler water temperature rises to the set point.
- Insertion depth: 3 in.
- Temperature Range (F): Maximum - 40 F above setpoint or 265 F, which ever is lower.
- Includes: Siphon Loop
- Mounting: Mount using 1/4 in. NPT female threads or surface mount through base of case
- Electrical Ratings (Millivolt)
- 0.25 A @ 0.25 to 12 Vdc
- At Full Load - 8A @ 120 Vac , 4A @ 240 Vac
- At Locked Rotor - 48A @ 120 Vac , 24A @ 240 Vac
- Operating Temperature Range (F): 100 F to 200 F
- Differential Temperature (F): 8 F
- Switching Action: Breaks contact on temperature rise to set point.
- Insulation Depth (in.): 1 1/2 in. to 3 in.