Product Details
- Voltage190/600 VAC
- Amperage10 A
- Hertz50/60 Hz
Description
Features:
- Low cost 3 phase protection for single side.
- Monitors for phase reversal, phase loss, unbalance % as a function of input voltage.
- Bright LED indicators for ON and FAULT.
- Universal 3 phase input: 190-600 VAC.
- Highly reliable passive electronics.
- Easy to install, no adjustments.
- Less than 1-second phase loss response.
- Automatic reset from a fault condition.
- Compact packaging: fits almost anywhere.
- Epoxy coated for added protection.
- Works great with the ICM450 for load side monitoring of part winding start motors and multiple compressor systems.
- For open board model, order ICM403.
- If all 3 phases are relatively equal and in proper sequence, the normally open contacts (Y/Y-OUT) will close when 24 volts is applied between C and Y terminals. If the phases are out of sequence, or if one is missing, the contacts will never close.
- If a phase is lost while the ICM401 is energized, the contacts will open immediately and will remain open until the error is corrected.
- An illuminated green LED indicates the output is energized, and an illuminated red LED indicates there is a fault and the output is de-energized.