Product Details
- Voltage115 v
- Dimensions5.5 x 4 x 4 in
- ColorUnpainted
- Wattage100 W
- Power MethodCorded Electric
- Amperage0.98 A
- Weight1.9 lbs
- Hertz50/60 Hz
- MaterialAluminum
Description
Protect mechanical, electrical and electronic equipment from low
temperatures, condensation and corrosion with this thermostatically
controlled, fan-driven heater that maintains a stable enclosure
temperature. Fan draws cool air from the bottom of the enclosure and
passes this air across the thermostat and heating element before being
released into enclosure cavity. Heated air is discharged through the top
of the heater unit.
These electric heaters are not designed for use in dusty, dirty, corrosive, or hazardous locations. Portions of the heater can get hot. Adequate protection must be taken to protect people from potential burns, and to protect other components from this heat. nVent recommends this heater only be installed in a totally-enclosed metal enclosure.
DO NOT INSTALL HEATERS ON WOOD PANELS. Heat sensitive components should not be placed near heater discharge area since this air can be quite warm. The clearance range defines the space that must be kept free of these components for proper and safe operation of the heater.
- Thermostat range adjustable from 0 F to 100 F (-18 C to 38 C).
- Four 10-32 x self-tapping screws are included with each heater.
- Ball bearing fan.
- Terminal strip with clamp connector that accepts both solid and stranded wire.