Flushmate M-101526-F31 Flush System

Complete Replacement System for all OEMs except Kohler K4404, Gerber 28-385 & -F3B- Serial No. (1.6 GPF).

The Flushmate III M-101526-F31 1.6 GPF Replacement System, is designed to replace the Flushmate M-101526-F3 1.6GPF 503 Series models for two piece toilet fixtures.The unit includes the Flushmate M-101526-F3 complete system with locknuts and gasket to install in your toilet tank.The Replacement system is designed to only work with existing pressure assist toilets that were originally equipped with the Flushmate III M-101526-F3 1.6 GPF system.

Product Features:

• The flush volume will never decrease, which means water savings are sustained for the life of the fixture.
• Flushmate equipped toilets use pressure (versus gravity) to produce a longer drain carry, pushing waste up to 33% further than the recommendations set by the American National Standards Institute (ANSI). Test conducted according to ANSI standard procedures as discussed in APSE Research Report 91-01.
• 70 gallon per minute peak flow of Flushmate pressure-assisted technology clears the bowl on the first flush
• 5-Year warranty
• For ALL OEMs except Kohler K 4404 tank and Gerber 28-385 tank ; CAUTION does NOT work in One-piece Fixtures ; Tank-to-Bowl Gasket
• It does NOT fit 10 Inch rough-in tanks, only 12 Inch rough-in tanks. “Rough-in” refers to the distance from the wall to the bolts at the center of the drain.
• ONLY used on model 503 Flushmate Systems 1.6 gpf tanks
• Does contain Cartridge

Product Components

• (1) M-101526-F3 Flushmate III 1.6 GPF Replacement System
• (1) Flushmate Tank to Toilet Tank Gasket (Gasket between Flushmate System and toilet tank)
• (1) Flushmate Tank to Toilet Tank Locknut (Locknut to mount Flushmate System into the toilet tank)
• (1) Flushmate Tank to Bowl Gasket (Gasket between toilet tank and toilet bowl)
• (1) Flushmate Lower Supply Locknut (Locknut to mount Flushmate System into the toilet tank)