Product Details
- Voltage24 v
Description
Note: Includes: Mounting bracket, screws, shaft adapter, water-tight strain-relief cable fittings.
This non-spring return direct-coupled damper actuator provides modulating and floating/2-position control for: air dampers, air handlers, ventilation flaps, louvers, and reliable control for air damper applications with up to 10 sq. ft./ 44lb.-in. (5 Nm) and 20 sq. ft./88 lb.-in. (10 Nm) (seal-less damper blades; air friction-dependent).
This non-spring return direct-coupled damper actuator provides modulating and floating/2-position control for: air dampers, air handlers, ventilation flaps, louvers, and reliable control for air damper applications with up to 10 sq. ft./ 44lb.-in. (5 Nm) and 20 sq. ft./88 lb.-in. (10 Nm) (seal-less damper blades; air friction-dependent).
- Description: Direct Coupled, General Purpose, Non-Spring Return Actuator.
- Actuator Type: Damper, Valve.
- Application Type: HVAC.
- Fail Safe Mode: Non-Spring Return.
- Control Signal: 2 position, Floating.
- Supply Voltage: 24 Vac +20%, -15%, 24 Vdc.
- Number of Internal Auxiliary Switch: 0.
- External Auxiliary Switches Available: Yes, SSW2-1M.
- Shaft Adapter Type: U-bolt clamp.
- Manual Operation: Declutch mechanism.
- Mounting: Direct Coupled.
- Frequency: 60 Hz, 50 Hz.
- Rotational Stroke: 95 +/- 3 degrees.
- Rotation To Open: By Switch.
- Dual Integral Adj. Stops (3 degree increments).
- Rotational Stroke Adjustment: Dual Integral Adj. Stops (3 degree increments).
- Compatible Damper Shafts: 1/4 to 1/2 in. square or 3/8 to 5/8 in. round.
- Power Consumption: 5 VA.
- Temperature Range: -5 F to +140 F.
- Environmental Rating: NEMA2.
- Declutch for manual adjustment.
- Adjustable mechanical end limits.
- Removable access cover for direct wiring.
- Mountable in any orientation.
- Function selection switch for selecting modulating or floating/2-position control.