Product Details
- Size3/4 in
- MaterialNickel Plated Bronze
- Capacity (BTU)63800 BTU
Description
One-Pipe Steam Thermostatic Radiator Valves - Allow automatic
temperature control in one-pipe steam or hot water systems for free
standing radiators, convectors and other heating units with standard
capacity requirements. Provide comfort and energy savings.
- Continually monitors and adjusts room temperature for consistent comfort and relief from under-heating and overheating.
- Adjustable balancing cartridge design made from resilient material (EPDM), ensures tight shut-off on steam and hot water systems.
- Nickel plated brass casted body.
- Replaceable cartridge for easy service with service tool.
- Controls include valve body, steam air vent.
- Used with T100 set point and capillary actuators.
- No electrical connection required for non-electric actuators.
- Normally open without control mounted.
- 3/4" Horizontal Straight Valve For Standard Capacity Radiator.
- Application Type : Especially suited for baseboards and straight runs where manual valves were not originally installed.
- Pipe Size (inch): 3/4 in.
- Pipe Size (DN): DN20.
- Body Pattern: Straight.
- Capacity: standard.
- Capacity (Cv): 2.7 Cv.
- Pressure Ratings (Hot Water (psi)): 150 psi maximum.
- Pressure Ratings (Hot Water (kPa)): 1034 kPa maximum.
- Pressure Ratings (Steam (psi)): 15 psi maximum.
- Pressure Ratings (Steam (kPa)): 103 kPa.
- Differential Pressure Ratings (psi): 17 psi maximum.
- Differential Pressure Ratings (psi): With T100 or T200: 15 psi.
- Differential Pressure Ratings (psi): With MV100: 36 psi.
- Differential Pressure Ratings (psi): For low noise: 3 psi.
- Temperature Ratings (F): 248 F Maximum.
- Temperature Ratings (C): 120 C Maximum.
- Dimensions (in.): 4 1/16 in x 4 3/16 in.
- Cartridge Change Tool: Yes - Use VA8200A001.
- Used With: T100.
- Inlet Connection Size (in.): 3/4 in.
- Inlet Connection Type: NPT.
- Outlet Connection Type: Threaded.