Product Details
- Voltage120 VAC
- Stages1
Description
Lennox furnace control kit for single stage applications, 2 or 3-speed
PSC blower motor with 120V HSI. Features diagnostic LED and push-
button Fault Recall. Includes dipswitches for easy blower delay
configuration.
- System diagnostics LED with fault recall.
- Fused to protect low voltage system transformers.
- 3 fan speeds.
- Adapter harness for application flexibility.
- Operating Temperature: -40 to 175°F.
- Humidity Range: 5% to 93% RH (non-condensing).
- Mounting: Snap in standoffs.
- Electrical Ratings @ 77°F (25°C): Input Voltage - 25 VAC 50 / 60 Hz, Maximum Input Current @ 25 VAC - 0.45 amp.
- Valve Relay: 1.5 amp @ 25 VAC 50 / 60 Hz 0.6 pf.
- Ignitor Relay: 1.2 amp @ 120 VAC 50 / 60 Hz.
- Inducer Relay: 2.8 amp @ 120 VAC.
- Circulator Relay: 10.0 FLA-25.0 LRA @ 120 VAC.
- Humidifier Load: 1.0 amp @ 24 VAC or 120 VAC.
- Electronic Air Cleaner: 1.0 amp @ 120 VAC.
- Minimum current to insure flame detection: 0.25 uA DC.
- Maximum current for non-detection: 0.10 uA DC.
- Maximum allowable leakage resistance: 100 M ohms.
- Timing Spec (@ 60 Hz) maximum.
- Flame establishing time: 0.8 sec.
- Flame failure response time: 2.0 seconds.