Product Details
- MaterialNickel Plated Bronze
- Size1/2 in
- Capacity (BTU)59100 BTU
- Max Temp (F)248 °F
Description
One-Pipe Steam Thermostatic Radiator Valves - Allow automatic
temperature control in one-pipe steam or hot water systems for free
standing radiators, convectors and other heating units with standard
capacity requirements. Provide comfort and energy savings.
- Continually monitors and adjusts room temperature for consistent comfort and relief from under-heating and overheating.
- Adjustable balancing cartridge design made from resilient material (EPDM), ensures tight shut-off on steam and hot water systems.
- Nickel plated brass casted body.
- Replaceable cartridge for easy service with service tool.
- Controls include valve body, steam air vent.
- Used with T100 set point and capillary actuators.
- No electrical connection required for non-electric actuators.
- Normally open without control mounted.
- Horizontal Angle Pattern 1/2 in. Valve for Standard Capacity Radiator.
- Application Type : Replaces most manual valves with minimum piping changes.
- Pipe Size (inch): 1/2 in.
- Pipe Size (DN): DN15.
- Body Pattern: Horizontal Angle.
- Capacity: standard.
- Capacity (Cv): 2.5 Cv.
- Connection Type: Threaded.
- Pressure Ratings (Hot Water (psi)): 150 psi maximum.
- Pressure Ratings (Hot Water (kPa)): 1034 kPa maximum.
- Pressure Ratings (Steam (psi)): 15 psi maximum.
- Pressure Ratings (Steam (kPa)): 103 kPa.
- Differential Pressure Ratings (psi): 17 psi maximum.
- Differential Pressure Ratings (psi): With T100 or T200: 15 psi.
- Differential Pressure Ratings (psi): With MV100: 36 psi.
- Differential Pressure Ratings (psi): For low noise: 3 psi.
- Temperature Ratings (F): 248 F Maximum.
- Temperature Ratings (C): 120 C Maximum.
- Dimensions (in.): 1 1/8 in. x 2 1/8 in.
- Cartridge Change Tool: Yes - Use VA8200A001.
- Inlet Connection Size (in.): 1/2 in.
- Inlet Connection Type: NPT.
- Outlet Connection Type: Threaded.