Product Details
- Size3/4 in
- Temperature Range0 to 175 °F
- Fuel TypeNatural Gas
- Capacity (BTU)200000 BTU
- Max Pressure1/2 PSI
- Voltage24 v
- Hertz60 Hz
Description
24 Vac Dual Standing Pilot Gas Valve with 3/4" x 3/4" inlet\outlet, standard opening and 3.5" wc pressure regulator setting.
Includes: Two 3/4 x 1/2" reducer bushing; 393200 ECO adapter;
Q340 (36") thermocouple with adapters; 393691 Natural to LP gas
conversion kit.
- Combination gas control for use in 24 Vac, gas-fired, standing pilot appliances with capacities from 30 to 300 cfh.
- Controls include manual valve, two automatic operators, servo pressure regulator and pilot adjustment.
- Compact size.
- Provide two automatic valves.
- Solenoid-operated first automatic valve opens on thermostat call for heat; closes when call for heat ends.
- Diaphragm-operated second automatic valve opens under control of regulator; closes if gas or power supply is interrupted.
- Meet codes requiring dual safety shutoff.
- Natural to LP and LP to Natural conversion kits available for standard and slow opening gas valves.
- LITE-RITE (OFF-PILOT-ON) lighting sequence.
- All adjustments, wiring connections and pilot outlet are accessible from top of control.
- Adjustable servo regulator effectively maintains almost constant gas output pressure under wide fluctuations in gas supply pressure.
- Compatible with ECO connector.
- Type: Single Stage.
- Ignition Type: Standing Pilot.
- Type of Gas: Natural.
- Inlet/Outlet Size (in.): 3/4 in. x 3/4 in.
- Body Pattern: Straight through with integral tapping; with flange.
- Opening Characteristics (standard, step): Standard.
- Capacity @ 1 in. p.d.: 200,000 BTU/hr; 30,000 BTU/hr minimum.
- Pressure Ratings: ½ psi, or 3.5 kPa.
- Pressure Regulator Setting: 3.5 in. wc (psi), or 0.87 kPa.
- Pilot Gas Outlet: Compression fitting for 1/4 in. OD tubing.
- Pressure Tapping: 1/8 in. NPT with plug.
- Electrical Connections: 1/4 in. quick-connect male terminals.
- Electrical Ratings: 24 Vac.
- Frequency: 60 Hz.
- Anticipator Setting: 0.7 A.
- Temperature Range: 0° to 175°F, or -18° to +79°C.
- Mounting: 0 to 90 degrees in any direction from the upright position of the gas control knob, including vertically.
- Dimensions (in.): 5 3/8 in. high x 4 1/16 in. wide x 2 11/16 in. deep.
- Dimensions (mm): 135 mm high x 104 mm wide x 69 mm deep.
- Approvals, American Gas Association IAS: AGA Design Certified: File No. L2025006.
- Approvals, Canadian Gas Association: CGA Design Certified: File No. L2025006.
Note: This
product must be installed by a qualified/licensed contractor and set up
with properly calibrated combustion test equipment. Failure to comply
with this could result in substantial property damage, severe personal
injury or death.