Product Details
- Size1/2 x 3/4 in
- Temperature Range-40 to 175 °F
- Fuel TypeNatural Gas
- Mount0 to 90 degrees in any direction from the upright position of the gas control knob, including vertically
- Capacity (BTU)270000 BTU
- Color/FinishBlack, Grey
- Used WithS86F,H; S860D; S8600F,H; S8610 and S90A,B Control Modules.
- Max Pressure1/2 PSI
- Voltage24 v
- Hertz60 Hz
Description
- Combination gas control for use in 24 Vac, gas-fired, intermittent pilot appliances with capacities from 30 to 415 cfh.
- Controls include safety shutoff, manual valve, two automatic operators, pressure regulator and pilot adjustment.
- Compact size.
- Provide
two automatic valves - Solenoid operated first automatic valve opens on
thermostat call for heat; closes when call for heat ends,
Diaphragm-operated second automatic valve opens under control of
regulator; closes if gas or power supply is interrupted.
- Meets codes requiring dual safety shutoff.
- Natural to LP and LP to Natural conversion kits available for standard and slow opening gas valves.
- All adjustments, wiring connections and pilot outlet are accessible from top of control.
- Adjustable
servo regulator effectively maintains almost constant gas output
pressure under wide fluctuations in gas supply pressure.
- Compatible with ECO connector.
- ON-OFF lighting sequence.
- 24 Vac Dual Intermittent Pilot Gas Valve with 1/2 in. x 3/4 in.
inlet/outlet, standard opening and 3.5 in. wc pressure regulator setting.
- Type: Single Stage.
- Ignition Type: Intermittent Pilot.
- Type of Gas: Natural.
- Inlet/Outlet Size (in.): 1/2 in. x 3/4 in.
- Body Pattern: Straight-through.
- Opening Characteristics: Standard.
- Capacity @ 1 in. p.d.: 270,000 BTU/hr; 30,000 BTU/hr minimum.
- Pressure Ratings (psi): 1/2 psi.
- Pressure Ratings (kPa): 3.5 kPa.
- Pressure Regulator Setting (psi): 3.5 in. wc.
- Pressure Regulator Setting (kPa): 0.87 kPa.
- Pilot Gas Outlet: Compression fitting for 1/4 in. OD tubing.
- Pressure Tapping: 1/8 in. NPT with plug.
- Electrical Connections: 1/4 in. quick-connect male terminals.
- Electrical Ratings: 24 Vac.
- Frequency: 60 Hz.
- Anticipator Setting: 0.7 A.
- Temperature Range (F): -40 F to +175 F.
- Temperature Range (C): -40 C to +79 C.
- Mounting: 0 to 90 degrees in any direction from the upright position of the gas control knob, including vertically.
- Dimensions (in.): 5 3/8 in. high x 4 1/16 in. wide x 2 11/16 in. deep.
- Dimensions (mm): 135 mm high x 104 mm wide x 69 mm deep.
- Includes: One 3/4 in. x 1/2 in. reducer bushing; 393691 Natural to LP gas conversion kit.
- Approvals, American Gas Association IAS: AGA Design Certified: File No. L2025007.
- Approvals, Canadian Gas Association: CGA Design Certified: File No. L2025007.
- Approvals, Underwriters Laboratories Inc: UL Component Recognized File No. MH5323.
This product must be installed by a qualified/licensed contractor and
set up with properly calibrated combustion test equipment. Failure to
comply with this could result in substantial property damage, severe
personal injury or death.