Product Details
- Capacity (BTU)1300000 BTU
- Max Pressure1/2 PSI
- Spring Range3 to 6 in
- Size (In)3/4 in
Description
Note: The vent protector (13A15) is not included.
These regulators are main burner only, non-lockup type. They
should not be used as a line gas pressure regulator
ahead of low pressure controls. Use only where
downstream controls can operate at line pressure.
The RV52, RV53, & RV61 are suitable for multipurpose
mounting. The RV81, RV91, RV111, & RV131 are
recommended for normal horizontal position only.
Maxitrol's original Straight-Thru-Flow design meets your
needs for high capacities at low inlet pressures. The
basic difference between Straight-Thru-Flow design and other type regulators lies in the conical valve.
The cone principal permits gas to flow straight through the regulator
without changing directions. Frictional flow resistance is reduced,
resulting in greater capacity. The improved flow pattern provides
accurate sensitive regulation at extremely low pressure differentials.
The ability of the regulator to handle large capacity appliances with
limited supply pressure offers a definite advantage to designers of
commercial and industrial gas-fired equipment.
Straight-Thru-Flow appliance regulators are intended for
use with all fuel gases, and may also be used with air or
other noncorrosive gases within their pressure limits.
This product should be installed by a licensed gas fitter.