Product Details
- Size3/4 in
- Connection TypeSweat
- MaterialForged Brass
- MountHorizontal/Vertical
- Voltage (v)24 VAC
Description
Erie™ PopTop™ Series valve bodies and actuators provide easy
installation for a variety of heating and cooling applications. Valve’s
actuator can be installed after valve body has been installed onto fan
coil, baseboard or air handler.
Part Description:
- Zone Valve Body Assembly
- Type 2-Way
- Nominal Size 3/4 Inch
- End Connection Soldered x Soldered
- Actuation Type 2-Position, Spring Return, On/Off (General Close-Off)
- Valve Position Normally Closed
- Body Material Forged Brass
- Valve Timing 25 Second for 60 Hertz/30 Second for 50 Hertz/9 Second for Spring Return (Full Open to Full Close)
- Mounting Type Horizontal/Vertical
- Input Supply Rating 24 Volt AC at 50/60 Hertz
- Temperature Rating 32 to 200 Deg F (Fluid)
- Pressure Rating 40 PSI (Close-Off), 300 PSI (Static)
- Media Handled Hot/Chilled Water, Glycol
- Inclusions/Features Hysteresis Synchronous Motor for Long Life, Spring Return Operation Provides a Fail-Safe, Manual Override Lever
- Application Heating and Cooling
- Applicable Standard ANSI Class IV
- Flow Capacity 7.5 Cv
- Electrical Connection 18 Inch Lead
- Material Nickel Plated Brass (Stem), Brass (Seat) Buna N (Paddle)
- Ambient Temperature 104 Deg F
- Humidity Range 5 to 95 Percent (Non-Condensing)
Features / Benefits
- Direct Replacement for All Existing 2-Position Pop-Top Applications
- Hysteresis Synchronous Motor for Long Life
- Spring Return Operation Provides a Fail Safe
- Valve Body Rated for 300 PSI Static Pressure
- Actuator Mounts Directly onto Valve Body without Need for Linkages or Calibration
- Manual Override Lever (Normally Closed Only)
- Actuator Can be Replaced without any Tools or Removal of Valve from System