Appleton EYS2 Sealing Fitting (Grayloy-Iron, 3/4in)

These Appleton sealing fittings minimize the passage of gases and vapors and prevent the passage of flames from one portion of a conduit system to another. they prevent pressure piling the within conduit system and contain any explosion that occurs. these models in the EYS series provide a close turning radius and can be used for sealing vertical conduit runs.

• Smooth, rounded integral bushing in each hub protects conductor insulation
• Accurately tapped, tapered threads for tight, rigid joints and ground continuity
• Dust-ignition proof, raintight
• Removable nipple in male sealing fitting may be used interchangeably in top or bottom hub
• Close radius type for sealing vertical conduit runs
• Restrict any explosion to the sealed off enclosure
• Required in class I, Division 1 and 2 locations within 18 in of enclosures containing apparatus that may cause arcs, sparks or high temperatures
• Required in class I, Division 1 and 2 locations where 2 in or larger conduit enters enclosure, fitting housing terminals, splices or taps
• Required in class I, Division 1 and 2 locations at the boundary where conduit leaves classified location
• Required in class I, Division 1 and 2 locations where two or more enclosures are connected by 36 in or less conduit, seal must be located within 18 in of either enclosure
• Required where cables (which exceed rate of gas or vapor transmission permitted for seals) are used in class I, Division 2locations
• 1.91 in turning radius
• Tapered FNPT connection
• 25% fill vertical sealing fittings for close turning radius
• Triple-Coat (Zinc Electroplate, Chromate And epoxy Powder Coat) finish